This article describes important steps in the commissioning process for EPSON RT devices as part of the Italian fiscalisation process.
Development and testing
Regardless of the model used (FP-90III RT or FP-81II RT), we recommend installing the EPSON FpWizard. The FpWizard utility programme is included in the EpsonFpSuite, which you can download from the EPSON support website at https://support.epson.net/setupnavi/?PINF=swlist&OSC=WS&LG2=DE&MKN=FP-90III%20RT.
Example EPSON FP-90III RT
Switching on for the first time
When all EPSON FP series control printers are switched on, the following message appears on the customer/operator display: "REGISTRATION STATUS".
FP-81II and FP-90III printers with the switch in the OFF position display the following message: "!!!WARNING!!!! SWITCH OFF"
When switching on the FP-90III printer configured with ‘web application’, the following message appears on the customer/operator screen
"READING WEB APPLICATION FROM MEMORY"
followed by the words:
"END READING"
To then switch to REGISTRATION STATUS.
The duration depends on the size of the loaded application.
Settings
In the case of RT devices that are used in productive operation, the service technician makes the necessary settings on the device.
The following settings must be made for both test and productive operation. These can usually be made using the FP Wizard.
Please note:
Demo mode or produktiv mode
RT devices are in production mode when purchased. If the device is to be used as a test system, it must first be set to demo mode. You can find instructions for this in the article "EPSON Demo-mode (CENSIMENTO)".
Setting payment methods
The mapping of payment types between middleware and RT device can be found in the article "EPSON paymentType Mapping - Italy".
Setting VAT rates
Please ensure that the mapping of the VAT rates is correct. The mappings used by the RetailForce middleware can be found in the article: "EPSON VAT rates (departments / reparti)".
Comments
0 comments
Please sign in to leave a comment.